Malachite &Formalin Dosage

____ mI

FORMALIN (@ 15ppm)
(dosage 15ml to 220 gallons.)

____ mI

MALACHITE (STD 2% solution)
(dosage 1ml to 17.6 gallons.)

Important instructions when adding treatment
Ensure water temperature is a minimum of 10°C / 50'F.
2) Mix both treatments and dilute with pond water.
3 Sprinkle evenly over the surface of the pond.
4) Turn UV off for 2 days (leave pump running.)
5) Stop feeding for 2 days (including day of treatment.)

6) Ensure sufficient oxygen is added to your pond.
Keep biological filter running.
8) DO NOT use any other treatments for a minimum of 7 days before or after use of malachite and formalin.


Repeat medication after 7 days (steps 1 - 8 apply)
If you have any doubts please phone before adding any medication.
After adding medication
A) Reduce feed for 1 week.
B) Test water daily for Ammonia, Nitrite and PH.
C) Add filter start, to re-establish filter bacteria.


IMPORTANT
Ensure watering can has not previously been used for garden chemicals.
Avoid treating the pond on very hot days.
Ensure salt level within the pond is below ¼ oz per gallon. (0.16 %)
Store Malachite and Formalin in a cool dark place.
Ensure Formalin is clear before use - Never use cloudy Formalin.